Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-29
1. :ACQuire:TYPE
Command Format:
:ACQuire:TYPE□<type>
Explanation:
The command is used to set the current acquisition type. The options are:
“NORMal”, “AVERage” and “PEAKdetec”.
Query Format:
:ACQuire:TYPE?
Returned Format:
Query returns “NORMAL”, “AVERAGE” or “PEAKDETECT”. The double quotes are
not returned.
Example:
:ACQuire:TYPE□AVERage Set the AVERage mode
:ACQuire:TYPE? Query returns “AVERAGE”
2. :ACQuire:MODE
Command Format:
:ACQuire:MODE□<mode>
Explanation:
The command is used to set the current acquisition mode. The options are
“REAL_TIME” and “EQUAL_TIME”.
Query Format:
:ACQuire:MODE?
Returned Format:
Query returns “REAL_TIME” or “EQUAL_TIME”. The double quotes are not
returned.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English