RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
Example:
:ACQuire:MODE□EQUAL_TIME Set the “EQUAL_TIME” mode
:ACQuire:MODE? Query returns “EQUAL_TIME”
3. :ACQuire:AVERages
Command Format:
:ACQuire:AVERages□<count>
Explanation:
The command is used to set the average acquisition time. The time range is form 2
to 256 at the multiples of 2.
Query Format:
:ACQuire:AVERages?
Returned Format:
Query returns 2, 4, 8, 16, 32, 64, 128 or 256.
Example:
:ACQuire:AVERages□16 Set average acquisition time to 16
:ACQuire:AVERages? Query returns 16
4. :ACQuire:SAMPlingrate?
Query Format:
:ACQuire:SAMPlingrate?□{CHANnel<n>|DIGITAL}
Explanation:
The command is used to query the current sampling rate of the analog channel
and digital channel. <n> is 1 or 2 means channel 1 or channel 2.
Returned Format:
Query returns the value of the sampling rate.
Example:
:ACQuire:SAMPlingrate?□CHANnel1 Query the Sampling Rate for Channel 1
400000000.000000 Returns 400M
To Next Page
Loading...
Need help?
General
