Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-32
1. :DISPlay:TYPE
Command Format:
:DISPlay:TYPE□<type>
Explanation:
The command is to set the display type as VECTors or DOTS.
Query Format:
:DISPlay:TYPE?
Returned Format:
Query returns “VECTORS” or “DOTS”. The double quotes are not returned.
Example:
:DISPlay:TYPE□VECTors Set the display type as “VECTors”
:DISPlay:TYPE? Query returns “VECTORS”
2. :DISPlay:GRID
Command Format:
:DISPlay:GRID□<grid>
Explanation:
The command is to set the display grid to “FULL” (set the grid and coordinate on),
“HALF” (set the grid on) or “OFF” (set the grid and coordinate off).
Query Format:
:DISPlay:GRID?
Returned Format:
Query returns “FULL”, “HALF” or “NONE”. The double quotes are not returned.
Example:
:DISPlay:GRID□FULL Set the grid and coordinate on
:DISPlay:GRID? Query returns “FULL”

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English