Rigol DS1000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-35
7. :DISPlay:CLEar
Command Format:
:DISPlay:CLEar
Explanation:
The command is to clear the waveform displayed on the screen.
8. :DISPlay:BRIGhtness
Command Format:
:DISPlay:BRIGhtness□<ncount>
Explanation:
The command is to set the grid brightness of the display from 0~32.
Query Format:
:DISPlay:BRIGhtness?
Returned Format:
Query returns an integer between 0~32.
Example:
:DISPlay:BRIGhtness□10 Set the grid brightness of the display to 10
:DISPlay:BRIGhtness? Query returns 10
9. :DISPlay:INTensity
Command Format:
:DISPlay:INTensity□<count>
Explanation:
The command is to set the brightness of the waveform from 0~32.
Query Format:
:DISPlay:INTensity?
Returned Format: