Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-39
3. :CHANnel<n>:DISPlay
Command Format:
:CHANnel<n>:DISPlay□{ON|OFF}
Explanation:
The command is to set channel n (n is 1 or 2) ON or OFF.
Query Format:
:CHANnel<n>:DISPlay?
Returned Format:
Query returns “ON” or “OFF”. The double quotes are not returned.
Example:
:CHANnel2:DISPlay□ON Set Channel 2 Display On
:CHANnel2:DISPlay? Query returns “ON”
4. :CHANnel<n>:INVert
Command Format:
:CHANnel<n>:INVert□{ON|OFF}
Explanation:
The command is to set the waveform invert ON or OFF.
Query Format:
:CHANnel<n>:INVert?
Returned Format:
Query returns “ON” or “OFF”. The double quotes are not returned.
Example:
:CHANnel2:INVert□OFF Set the waveform invert of Channel 2 to “OFF”.
:CHANnel2:INVert? Query returns “OFF”.

Rigol DS1000 Series Specifications

General

Trigger Modes	Edge, Pulse, Video, Slope, Alternate
Timebase Range	5 ns/div to 50 s/div
Channels	2
Input Impedance	1 MΩ ±2%, 15 pF ±3 pF
Vertical Resolution	8-bit
Interfaces	USB Host, USB Device
Input Coupling	AC, DC, GND
Power Supply	100-240 VAC
Dimensions	303 mm