RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
5. :CHANnel<n>:OFFSet
Command Format:
:CHANnel<n>:OFFSet□<offset>
Explanation:
The command is to set the vertical offset of the waveform.
When scale >100mV, the range of <Offset> is -40V~ +40V;
When Scale <=100mV, the range of <Offset> is -2V ~ +2V;
The options of n are 1 or 2.
Query Format:
:CHANnel<n>:OFFSet?
Returned Format:
Query returns the value of <Offset>.
Example:
:CHANnel2:OFFSet□20 Set the vertical offset of Channel 2 to 20V
:CHANnel2:OFFSet? Query returns 2.000e+01
6. :CHANnel<n>:PROBe
Command Format:
:CHANnel<n>:PROBe□<attn>
Explanation:
The command is to set the attenuation factor of the probe: 1X, 5X, 10X, 50X, 100X,
500X or 1000X to keep the gauge exact. The options of n are 1 or 2.
Query Format:
:CHANnel<n>:PROBe?
Returned Format:
Query returns
the set
valu
e of <attn>
in scientif
ic nume
ric notation.
Example:
:CHANnel2:PROBe□10 Set probe attenuation as 10X for channel 2
:CHANnel2:PROBe? Query returns 1.000e+01
To Next Page
Loading...
Need help?
General
