Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-45
1. :TIMebase:MODE
Command Format:
:TIMebase:MODE□<mode>
Explanation:
The command is to set the horizontal scan as “MAIN” (main timebase) or
“DELAYED” (delayed scan).
Query Format:
:TIMebase:MODE?
Returned Format:
Query returns “MAIN” or “DELAYED”. The double quotes are not returned.
Example:
:TIMebase:MODE□MAIN Set the horizontal timebase mode as “MAIN”
:TIMebase:MODE? Query returns “MAIN”
2. :TIMebase[:DELayed]:OFFSet
Command Format:
:TIMebase[:DELayed]:OFFSet□<offset>
Explanation:
The command is to adjust the timebase offset in “MAIN” or “Delayed” mode.
<offset> is 1s ~ momery terminal when it is Normal mode
-500s ~ +500s when it is Stop mode
-6*Scale ~ +6*Scale when it is Roll mode (“Scale” indicates
the current horizontal scale. The default
unit is s/div)
When it is “MAIN”, omit [:DELayed].
Query Format:
:TIMebase[:DELayed]:OFFSet?
Returned Format:
Query returns the set value of <offset> in scientific numeric notation.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English