Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-46
Example:
:TIMebase:MODE□MAIN Set the main timebase
:TIMebase:OFFSet□1 Set the timebase offset as 1s
:TIMebase:OFFSet? Query returns 1.000e+00
3. :TIMebase[:DELayed]:SCALe
Command Format:
:TIMebase[:DELayed]:SCALe□<scale_val>
Explanation:
The command is to set the time base scale in “MAIN” or “DELAYE” mode. The unit
is “S/div”. When the “Delayed” is “ON”, change the Delayed Timebase Scale will
change the width of window to amplify waveform.
<scale_val> is 2ns - 50s when it is Normal mode
500ms - 50s when it is Roll mode
When “MAIN” is “ON”, omit [: DELayed].
Query Format:
:TIMebase[:DELayed]:SCALe?
Returned Format:
Query returns the set value of < scale_val> in scientific numeric notation.
Example:
:TIMebase:MODE□DELayed Set the “MAIN‟ timebase
:TIMebase:SCALe□2 Set the timebase scale as 2s
:TIMebase:SCALe? Query returns 2.000e+00
4. :TIMebase:FORMat
Command Format:
:TIMebase:FORMat□<value>
Explanation:
The command is to set the timebase format as “XY”, “YT‟ or “SCANning”.
Query Format:

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English