Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-59
Returned Format:
Query returns “+GREATER THAN”, “+LESS THAN”, “+EQUAL”, “-GREATER THAN”,
“-LESS THAN” or “-EQUAL”. The double quotes are not returned.
Example:
:TRIGger:SLOPe:MODE□+GREATERTHAN
Set the slope condition as “+Greater than”
:TRIGger:SLOPe:MODE?
Query Returns “+GREATER THAN”
4.3 :TRIGger:SLOPe:WINDow
Command Format:
:TRIGger:SLOPe:WINDow□<count>
Explanation:
The command is to set the border of the vertical window as PA, PB, PAB, NA, NB or
NAB. <count> can be set to “PA”, “PB”, “PAB”, “NA”, “NB” or “NAB”.
Query Format:
:TRIGger:SLOPe:WINDow?
Returned Format:
Query returns “P_WIN_A”, “P_WIN_B”, “P_WIN_AB”, “N_WIN_A”, “N_WIN_B” or
“N_WIN_AB”. The double quotes are not returned.
Example:
:TRIGger:SLOPe:WINDow□PA Set the border of the vertical window to “PA”
:TRIGger:SLOPe:WINDow? Query returns “P_WIN_A”
4.4 :TRIGger:SLOPe:LEVelA
Command Format:
:TRIGger:SLOPe:LEVelA□<value>
Explanation:
The command is to set the upper trigger level A.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English