Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-78
1. :LA:DISPlay
Command Format:
:LA:DISPlay□{ON|OFF}
Explanation:
The command is to control the display of the digital channel On or OFF.
Query Format:
:LA:DISPlay?
Returned Format:
Query returns “ON” or “OFF”. The double quotes are not returned.
Example:
:LA:DISPlay□ON Set the digital channel On
:LA:DISPlay? Query returns "ON”
2. :DIGital<n>:TURN
Command Format:
:DIGital<n>:TURN□{ON|OFF}
Explanation:
The command is to control the specified digital channel ON or OFF
Query Format:
:DIGital<n>:TURN?
Returned Format:
Query returns “ON” or “OFF”. The double quotes are not returned.
Example:
:DIGital2:TURN□ON Set the digital Channel 2 On
:DIGital<n>:TURN? Query returns “ON”

Rigol DS1000 Series Specifications

General

Trigger Modes	Edge, Pulse, Video, Slope, Alternate
Timebase Range	5 ns/div to 50 s/div
Channels	2
Input Impedance	1 MΩ ±2%, 15 pF ±3 pF
Vertical Resolution	8-bit
Interfaces	USB Host, USB Device
Input Coupling	AC, DC, GND
Power Supply	100-240 VAC
Dimensions	303 mm