RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
3. :DIGital<n>:POSition
Command Format:
:DIGital<n>:POSition□<position>
Explanation:
The command is to set the size of the digital waveform. When the size of the
waveform is large, you can see the waveform on the screen from channels 0~7.
When the size of the waveform is small, you can see the waveform on the screen
from channels 0~15.
The range of <n>is 0~15;
<position> is 0~7 (if display size = large)
0~15 (if display size = small)
Query Format:
:DIGital<n>:POSition?
Returned Format:
Query returns
the set
valu
e of <positio
n>.
Example:
:DIGital2:POSition□3
Set the count of waveform for the digital Channel 2 to 3.
:DIGital2:POSition？
Query returns 3.
4. :LA:THReshold
Command Format:
:LA:THReshold□<value>[suffix]
Explanation:
The command is to set the threshold as TTL, CMOS, ECL or ueser defined.
<Value> can be “CMOS”, “ECL”, “TTL” and User Defined, the <User Defined>
value is in NR3 format from -8.00 to +8.00
[suffix] can be “V”, “mV” or “uV”.
To Next Page
Loading...
Need help?
General
