RIGOL
© 2006 RIGOL Technologies, Inc.
User‟s Guide for DS1000 Series
2. Track Mode
Figure 2-121 Table 2-81 Cursor explanation
Set Track mode in cursor
measurement
Set Cursor A in conjunction with
CH1, CH2 or turn off Cursor A
Set Cursor B in conjunction with
CH1, CH2 or turn off Cursor B
Turn the multifunctional knob ( )
to move cursor A horizontally
Turn the multifunctional knob ( )
to move cursor B horizontally
In cursor track mode, the cursors move together with the selected waveform.
To do Track mode Cursor Measurements, follow these steps:
1. Select the Track mode for cursor measurement by pressing soft button as:
Cursor→Mode→Track.
2. Select channel Source for Cursor A and Cursor B by pressing soft button as:
Cursor→Cursor A or Cursor B→CH1, CH2 or None.
3. Move the cursors to adjust the horizontal positions of the cursors: (Details in the
following Table)
Table 2-82 The Cursor usage
Turn the multifunctional knob ( ) to move cursor A horizontally
Turn the multifunctional knob ( ) to move Cursor B horizontally
To Next Page
Loading...
Need help?
General
