RIGOL
© 2006 RIGOL Technologies, Inc.
User‟s Guide for DS1000 Series
4. Volts/Div settings
The Volts/Div control has Coarse or Fine configuration. The Vertical Sensitivity is
20mv/div - 50V/div.
Coarse: It is the default setting of Volts/Div in a 1-2-5-step sequence from 20mV/div,
5mV/div, 10mV, to 50 V/div.
Fine: This setting changes the vertical scale to small steps between the coarse
settings. It will be helpful to adjust the waveform in smooth steps.
Figure 2-9
Fine configurations
Coarse/Fine Shortcut key:
To change Coarse/Fine setting, not only by menu but also by pressing vertical
knob
To Next Page
Loading...
Need help?
General
