Rigol DS1000CA Series - Page 15

Programming Introduction RIGOL
Programming Guide for DS1000CA Series
2-3
1. *IDN?
Command Format:
*IDN?
Function Explanation:
This command is used to query the manufacturer, model, sequence number and
the version number composed of numbers and separated by “.”.
Returned Format:
RIGOL TECHNOLOGIES,<model>,<sequence_number>,<rev_number>
Example:
RIGOL TECHNOLOGIES,DS1302CA,DS1AA093200284,03.08.01
2. *RST
Command Format：
*RST
Function Explanation：
This command is used to reset the system parameters.