Rigol DS1000CA Series - KEY Commands

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-66
KEY Commands
KEY Commands are used to control the keys and knobs on the front panel of the
oscilloscope.
KEY Commands include:
 :KEY:LOCK
 :KEY:RUN
 :KEY:AUTO
 :KEY:CHANnel1
 :KEY:CHANnel2
 :KEY:MATH
 :KEY:REF
 :KEY:F1
 :KEY:F2
 :KEY:F3
 :KEY:F4
 :KEY:F5
 :KEY:MNUoff
 :KEY:MEASure
 :KEY:CURSor
 :KEY:ACQuire
 :KEY:DISPlay
 :KEY:STORage
 :KEY:UTILity
 :KEY:MNUTIME
 :KEY:MNUTRIG
 :KEY:Trig%50
 :KEY:FORCe
 :KEY:V_POS_INC
 :KEY:V_POS_DEC
 :KEY:V_SCALE_INC
 :KEY:V_SCALE_DEC
 :KEY:H_SCALE_INC
 :KEY:H_SCALE_DEC
 :KEY:TRIG_LVL_INC
 :KEY:TRIG_LVL_DEC
 :KEY:H_POS_INC
 :KEY:H_POS_DEC
 :KEY:PROMPT_V
 :KEY:PROMPT_H
 :KEY:FUNCtion
 :KEY:+FUNCtion
 :KEY:-FUNCtion
 :KEY:PROMPT_V_POS
 :KEY:PROMPT_H_POS
 :KEY:PROMPT_TRIG_LVL
 :KEY:OFF
The detailed information of each command are given as follows: