Rigol DS1000CA Series - Page 87

Programming Introduction RIGOL
Programming Guide for DS1000CA Series
2-75
31. :KEY:TRIG_LVL_DEC
Command Format:
:KEY:TRIG_LVL_DEC
Function Explanation:
This command is used to decrease the trigger level gradually.
32. :KEY:H_POS_INC
Command Format:
:KEY:H_POS_INC
Function Explanation:
This command is used to increase the horizontal offset of the current channel
gradually.
33. :KEY:H_POS_DEC
Command Format:
:KEY:H_POS_DEC
Function Explanation:
This command is used to decrease the horizontal offset of the current channel
with gradually.
34. :KEY:PROMPT_V
Command Format:
:KEY:PROMPT_V
Function Explanation:
This command is used to switch the vertical scale between Coarse and Fine.
Coarse step sequence is 1-2-5, Fine is to adjust gradually.