Rigol DS1000CA Series - Channel Commands

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-48
CHANnel Commands
Both channels of the instrument can be controlled by CHANnel Commands. Each
channel has an independent vertical menu and each option could be set
separately.
CHANnel Commands include:
 :CHANnel<n>:BWLimit
 :CHANnel<n>:COUPling
 :CHANnel<n>:DISPlay
 :CHANnel<n>:INVert
 :CHANnel<n>:OFFSet
 :CHANnel<n>:PROBe
 :CHANnel<n>:SCALe
 :CHANnel<n>:FILTer
 :CHANnel<n>:VERNier
 :CHANnel<n>:INPut
The detailed information of each command are given as follows: