Rigol DS1000CA Series Programming Guide

Programming Introduction RIGOL
Programming Guide for DS1000CA Series
2-45
MATH Commands
MATH Commands are used to excute adding, subtracting, multiplying and FFT
operaion from channels and display the results that also can be measured by grid
or cursor.
MATH Commands include:
 :MATH:DISPlay
 :MATH:OPERate
 :FFT:DISPlay
The detailed information of each command are given as follows:

Rigol DS1000CA Series Specifications

General

Brand	Rigol
Model	DS1000CA Series
Category	Test Equipment
Language	English