Rigol DS1000CA Series - Page 86

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-74
27. :KEY:V_SCALE_DEC
Command Format:
:KEY:V_SCALE_DEC
Function Explanation:
This command is used to decrease the vertical scale of the current channel
with the 5-2-1 step sequence.
28. :KEY:H_SCALE_INC
Command Format:
:KEY:H_SCALE_INC
Function Explanation:
This command is used to decrease the horizontal scale of the current channel
with the 5-2-1 step sequence.
29. :KEY:H_SCALE_DEC
Command Format:
:KEY:H_SCALE_DEC
Function Explanation:
This command is used to increase the horizontal scale of the current channel
with the 1-2-5 step sequence.
30. :KEY:TRIG_LVL_INC
Command Format:
:KEY:TRIG_LVL_INC
Function Explanation:
This command is used to increase the trigger level gradually.