RIGOL Programming Introduction
Programming Guide for DS1000CA Series
Function Explanation:
This command is similar to press and select the option of Menu F4.
Repeating this command would enter next level of menu.
12. :KEY:F5
Command Format:
:KEY:F5
Function Explanation:
This command is similar to press and select the option of Menu F5.
Repeating this command would enter next level of menu.
13. :KEY:MNUoff
Command Format:
:KEY:MNUoff
Function Explanation:
This command is used to set the on-state for current menu. Repeating the
command would make the current menu switched between ON and OFF.
14. :KEY:MEASure
Command Format:
:KEY:MEASure
Function Explanation:
This command is used to set the on-state for measure function and its
menu. Repeating the command would make the measure switched between
ON and OFF.
15. :KEY:CURSor
Command Format:
To Next Page
Loading...
