RIGOL Programming Introduction
Programming Guide for DS1000CA Series
:TRIG:PULS:SENS？ Query returns 5.00e-01
3. :TRIGger:PULSe:WIDTh
Command Format:
:TRIGger:PULSe:WIDTh <wid>
:TRIGger:PULSe:WIDTh?
Explanation:
The commands are used to set and query the pulse width from 20ns to 10s.
Returned Format:
Query returns the set value of <wid> in scientific numeric notation in s.
Example:
:TRIG:PULS:WIDT 0.001 Set the pulse width as 1ms
:TRIG:PULS:WIDT? Query returns 1.000e-03
To Next Page
Loading...
