Rigol DS1000CA Series - Page 54

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-42
Returned Format:
Query returns the set value of <count> in scientific numeric notation in s.
Example:
:TRIG:ALT:PULS:HOLD 1 Set the trigger holdoff as 1s
:TRIG:ALT:PULS:HOLD? Query returns 1.000e+00
17. :TRIGger:ALTernation<mode>:SENSitivity
Command Format:
:TRIGger:ALTernation<mode>:SENSitivity <count>
:TRIGger:ALTernation<mode>:SLOPe:SENSitivity?
Function Explanation:
The commands are used to set and query the trigger sensitivity of ALTernation
trigger. The options of <mode> are “:EDGE”, “:PULSe”, “:SLOPe” or “:VIDEO”.
The range of <count> is 0.1~1.
Returned Format:
Query returns the set value of <count> in scientific numeric notation in div.
Example:
:TRIG:ALT:EDGE:SENS 0.5 Set the trigger sensitivity as 0.5div
:TRIG:ALT:EDGE:SLOP:SENS? Query returns 5.00e-01