Rigol DS1000CA Series User Manual

RIGOL
5-4 Copyright ©1998-2008 RIGOL Technologies, Inc.
User’s Guide for DS1000CA Series
Overshoot <20%
Trigger
Trigger Sensitivity 0.1div-1.0div (adjustable)
Trigger Level Range Internal ±6 divisions from center of screen
EXT ±0.6V
EXT/5 ±3V
Trigger Level Accuracy
(typical) applicable for
the signal of rising and
falling time ≥20ns
Internal ±(0.3div×V/div)(±4 divisions from
center of screen)
EXT ±(6% of setting + 40 mV)
EXT/5 ±(6% of setting + 200 mV)
Trigger Offset
Normal mode: pre-trigger(262144/ sampling rate),
delayed trigger 1s
Slow Scan mode: pre-trigger 6div, delayed trigger 6div
Trigger Holdoff range 100ns-1.5s
Set Level to 50%
(typical)
Input signal frequency ≥50Hz
Edge Trigger
Edge trigger slope Rising, Falling, Rising + Falling
Pulse Trigger
Trigger condition
(＞, ＜, =) Positive pulse, (＞, ＜, =) negative pulse
Pulse Width range 20ns – 10s
Video Trigger
Video standard &
line frequency
Support standard NTSC, PAL and SECAM broadcast
systems. Line number range: 1-525 (NTSC) and 1-625
(PAL/SECAM)
Slope Trigger
Trigger condition
(＞, ＜, =) Positive slope, (＞, ＜, =) negative slope
Time setting 20ns – 10s
Alternate Trigger
Trigger on CH1 Edge, Pulse, Video, Slope
Trigger on CH2 Edge, Pulse, Video, Slope

Rigol DS1000CA Series Specifications

General

Brand	Rigol
Model	DS1000CA Series
Category	Test Equipment
Language	English