Rigol DS1104Z Plus User Manual

Chapter 6 MATH and Measurement RIGOL
MSO1000Z/DS1000Z User’s Guide 6-23
Math Operation Label
Press MATH  Math  Label  Display to enable or disable the MATH label.
When "ON" is selected, you can add the MATH label via two modes.
 To Use Preset Label
Press Preset to select ADD, SUB, MUL, DIV, FFT, AND, OR, XOR, NOT, Intg, Diff,
Sqrt, Lg, Ln, Exp, Abs, LPas, HPas, BPas or BStop.
 To Edit Label Manually
Press Label Edit to open the label input interface. You can input the label
manually. For the details, please refer to the introduction in "
Channel Label".
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Rigol DS1104Z Plus Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Memory Depth	24 Mpts
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Timebase Range	5 ns/div to 50 s/div
Connectivity	USB Host, USB Device, LAN, AUX
Vertical Resolution	8 bits
Power Supply	100-240 V AC, 45-440 Hz
Display	7 inch TFT LCD
Trigger Types	Edge, Pulse, Video, Slope
Input Impedance	1 MΩ ± 2%