Remote Control
DS2000E series digital oscilloscope can be connected to the PC via the USB,
LAN, or GPIB interface to set up communication and realize remote control
through the PC. The remote control can be realized by using SCPI (Standard
Commands for Programmable Instruments) commands. DS2000E series digital
oscilloscope supports two ways of remote control: user-defined programming
and PC software (e.g. RIGOL Ultra Sigma).
More Product Information
1. Obtain the device information
Press Utility System System Info to obtain the information of the
instrument, including the manufacturer, model, serial number, software
version number, and hardware version number.
2. Check the option installation status
Press Utility Options Installed to view the options currently
installed on the oscilloscope and their information. Press Setup to enter
the option activation operation menu and input the serial number of the
option that you've purchased.
For more information about this instrument, refer to the relevant manuals by
logging in to the official website of RIGOL (
www.rigol.com) to download them.
DS2000E User's Guide
: introduces the functions of the instrument and the
operation methods, remote control methods, possible failures and solutions in
using the instrument, the technical specifications, and order information;
DS2000E Programming Guide
: provides detailed descriptions of SCPI
commands and programming examples of the instrument.
DS2000E Datasheet
: provides the main features and technical specifications of
the instrument.
To Next Page
Loading...
