Rigol DSG800 Series User Manual

RIGOL Chapter 2 Front Panel Operations
2-36 DSG800 User's Guide
To Set the System Parameters
Set the system-related parameters.
Language
DSG800 supports menus in multiple languages as well as Chinese and English help
information, prompt messages and interface display.
Press Syst  Language to select the desired language.
Reset
Press Syst  Reset to perform "Power On", "Preset Type" and "Save Preset"
operations.
1. Power On
Press Power On to select "Last" or "Preset".
 When "Last" is selected, the system setting before the last power-off will be
loaded automatically at power-on.
 When "Preset" is selected, the setting defined in Preset Type will be
loaded automatically at power-on.
2. Preset Type
Press Preset Type to select "Factory" or "User".
 When Power On is set to "Preset", the specified preset type will be loaded
at power-on.
 After the instrument starts, press Preset at the front panel under any
operation interface to recall the factory setting (as shown in Table 2-1) or
user setting.
3. Save Preset
Press Save Preset to store the current system configuration as user-defined
setting in the internal non-volatile memory. When Preset Type is set to "User",
the configuration will be loaded when you recall the "Preset" configuration.
Note: When Preset Type is set to "Factory", this menu is grayed out and
disabled.
w ww. . com
information@itm.com1.800.561.8187

Rigol DSG800 Series Specifications

General

Brand	Rigol
Model	DSG800 Series
Category	Portable Generator
Language	English