Operator Manual Rev 2.00
Page 12 AXLE-612-200
Creating a Truck
2.3 Creating a new truck
Press & Hold the [UP] arrow key.
1. Enter name using number pad. Press [OK].
2. Use [UP] Arrow key to Select 1 or 2 pass. Press [OK].
3. Enter tare weight if one pass. Press [OK].
2.4 Printing
Printing will occur automatically if the truck is selected using key fob or [F1] key. If
the truck has not been selected then printing will not occur and the Database will
not be updated.
RE-PRINT
Pressing [F2] will reprint a copy of the last truck that weighed. This is a single
print that occurs from the most recent truck that has weighed.
To Next Page
Loading...
