Operator Manual Rev 1.21
Page 12 003X-607-121
5.6. Live Weighing
• Press and hold the <LIVE WT> key to switch
between normal weighing and live weight
mode. The display will briefly show NORMAL
or LIVE.WT.
• Note: During normal weighing, this key
operates exactly like a manual <HOLD> key.
• When in Live-Weight mode and while the Net weight is
within the zero 'dead' band, the instrument shows the
current weight.
• Press the <TARE> or <ZERO> key
to clear any residual weight and
return the scale to the zero state.
or
• Move the animal on to the weigh platform.
• Once the weight moves outside the zero 'dead' band the
instrument begins to calculate a long-term average that
compensates for any movement in the mass. The
instrument flashes the Hold annunciator and shows the
current average value.
• The Hold annunciator is steady when the final sample
weight is shown on the display.
• Press the <LIVE.WT> key to force the sample
to be recalculated.
• Once the animal is removed, the instrument
automatically clears the previous reading ready for the
next animal.
To Next Page
Loading...
Need help?
General
