Operator Manual Rev 1.21
Page 14 003X-607-121
5.9. High Resolution (K303)
• When the <HI RES> key is pressed, the
indicator shows a high resolution (x 10) on the
display.
• While the high resolution is displayed the units
annunciator flashes.
• Printing is inhibited while the high resolution is
displayed.
5.10. Automatic Tare
• The <A.TARE> key is pressed to activate and
deactivate the automatic tare mode.
• Press and hold the <A.TARE> key for two
seconds. The automatic tare threshold weight
will be displayed.
• Use the <GROSS/NET> and
<PRINT> keys to alter the
threshold weight.
and
• Press <A.TARE> . The current threshold
weight will be stored.
• When the automatic tare is active the instrument will be
tared whenever the weight is above the threshold
weight. The tare weight is reset to zero when the gross
weight is motionless within the zero “dead” band.
To Next Page
Loading...
