Operator Manual Rev 1.21
003X-607-121 Page 3
2. Safety
2.1. Operating Environment
• Operating Temperature: –10 to 50°C
• Humidity: 100%
• Operating Voltage: Shown on Rear Label
• IP69K
2.2. Electrical Safety
• For your protection all mains electrical hardware must be
rated to the environmental conditions of use.
• Pluggable equipment must be installed near an easily
accessible power socket outlet.
• To avoid the possibility of electric shock or damage to the
instrument, always switch off or isolate the instrument
from the power supply before maintenance is carried out.
2.3. Cleaning
• The unit has been designed for high-pressure, high
temperature (80°C) wash-down environments. However
long periods of focused pressure at a close range will
damage the casing. Casing is chemical resistant.
To Next Page
Loading...
