Operator Manual Rev 1.21
003X-607-121 Page 13
5.7. Showing Totals
• The <PRINT> key is used not only to print the
current weight but also to add that weight to
the current total.
• When the <TOTAL> key is pressed, the
indicator displays COUNT followed by the
number of items in the total.
• After this the indicator displays TOTAL followed by the
current total weight.
• If the total weight is too large to display in six digits, the
weight is shown in two sections labelled with the upper
six digits displayed before the lower six digits.
• Press and hold the <PRINT> key to cause the
total accumulated weight to be printed and
then cleared.
5.8. High Resolution (K304, K306)
• When the <HI RES> key is pressed, the
indicator shows a high resolution (x 10) on the
display for a period of 5 seconds before
reverting to the normal weight display.
• While the high resolution is displayed the units
annunciator flashes.
• Printing is inhibited while the high resolution is
displayed.
To Next Page
Loading...
Need help?
General
