LightSYS User Manual Page 46
Tamper: A device that prevents system hardware from being tampered with by
triggering an alarm whenever a hardware component is opened.
Fault Reporting: If required, your security system may also report to the alarm
receiving center any faults or malfunctions it senses, so that a service call can be
made.
User Code: Up to a four-digit or six-digit code that is used to perform many of the
LightSYS functions.
Programming output (PO): A household appliance. In addition to your system's
normal operation, it is possible to place a household appliance or premises
lighting under the control of the LightSYS where it can be conveniently turned
on and off automatically, or by user command from any system keypad.
Weekly Schedules: Through the use of the system's built-in clock, it is possible to
schedule automatic operations such as setting and unsetting, PO activation, and
user limitation.
Zone: A single detector, or collection of detectors, usually relating to a certain area
of the premises or type of protection. Zones that use devices designed to detect
break-ins are called intrusion zones. Another kind of zone may contain one or
more smoke detectors. Such zones are called fire zones. An environmental zone
typically protects the premises from gas leaks and/or flooding.
To Next Page
Loading...
