Riso SF5 Series - Network Connection; Connecting with PC

Chapter 1 Installing the Printer Driver
13
Chapter 1 Installing the Printer Driver
13
NetworkConnection
ConnectingwithPC
¢
WhenusingtheSF5x3Series
Optional network interface card, “RISO NETWORK KIT” is required when connecting the computer to the RISO printer
through network to use as a network printer.
In advance, connect the RISO printer to the network and congure printer network settings (ex. IP address).
Use a commercially available LAN cable (10BASE-T or 100BASE-TX) appropriate for your network environment.
B
UseaLANcablespeciedwithcategory5ormore.
B
You can use either a straight or crossover cable for the LAN cable that will connect to the LAN port of the printer.
¢
WhenyourRISOprinterisconnectedwithonePC
LAN port of your RISO printer
Windows PC
LAN cable
¢
WhenyourRISOprinterisconnectedonnetwork
LAN cable
LAN port of your RISO printer
Windows PC
Hub
Windows PC
Windows PC