Riso SF5 Series - Selecting a Local Port for RISORINC Files

Chapter 2 Working with the Printer Driver
61
Chapter 2 Working with the Printer Driver
61
SelectingaLocalPortforRISORINCFiles
1
OpenthePropertiesdialogbox.
See Steps 1 and 2 on
A
33.
2
Openthe[Ports]tab.
3
PlaceacheckmarkinthecheckboxoftheLocalPortforRISORINClesthatwas
addedunder[PrintPort],and[OK].
B
AftercreatingtheRISORINCleusingthe[Layout]feature,restoretheusualprintportinthesamewayyou
settheLocalPort.
B
It is convenient to install two RISO Printer Drivers and register one for printer output and the other for RISORINC
Files.