Riso SF5 Series - Unexpected Print Result

86
Chapter 5 Appendix
86
Chapter 5 Appendix
UnexpectedPrintResult
Problem Cause/Condition Action
Graphics cannot be printed
properly.
The current [RISO...] printer driver
was not selected as active when
editing graphics.
Select the current [RISO...] Printer Driver and
edit graphics again because graphics may
not be printed properly if they are edited with
another Printer Driver selected.
The specied custom paper size
was so large that unexpected
margins were assigned on a page.
Select another paper size or specify the
custom paper size within the valid range.
Images are reduced
unexpectedly.
Do you use the Printer Driver
corresponding to your RISO
printer?
If the name of your RISO printer is different
from the model name of your Printer Driver,
the document data cannot be printed out
correctly.
Some fonts cannot be
printed properly.
The [Use Printer Font] option
is selected in the application
software.
Cancel the [Use Printer Font] option in the
application software.
The page image is not
centered or is clipped at an
edge.
The paper size setting in the
application software is not identical
with that in the Printer Driver.
Make both paper size setting identical.
The print area specied in the
application software is beyond the
maximum print area of your RISO
printer.
Increase the border margins in the application
software to contain the page image within the
printable area of your RISO printer.
There is something wrong with the
Drum in your RISO printer.
Check your RISO printer, referring to the
dedicated user’s guide.