Riso SF5 Series - Printing a Test Page

30
Chapter 1 Installing the Printer Driver
30
Chapter 1 Installing the Printer Driver
7
Click[OK].
B
The screen in step 7 is not displayed in the SF5 Series.
B
For descriptions about each item, refer to
A
45.
Next, print a test page.
B
WhenchangingthenameofthefoldersinUSBFlashDriveormovingtheoriginaldata,usetheRISOUSB
PRINTMANAGER.Fordetails,seethe“RISOUtilitySoftwareUser’sGuide”
Printingatestpage
This section describes the procedures for printing a test page by using the USB ash-via-Printer Driver.
B
UsetheUSBFlashDriveforwhichadedicatedfolder(
A
28)hasbeencreatedinadvance.
1
Opentheprintfolder.
ForWindowsVista:
Click on the [Start] icon-[Control Panel]-[Hardware and Sound]-[Printers] and open the [Printers] folder.
ForWindows7:
Click on the [Start] icon-[Control Panel]-[Hardware and Sound]-[Devices and Printers] and open the [Devices and
Printers] folder.
ForWindows8.1:
Open the “Apps” screen and click [Control Panel]-[Hardware and Sound]-[Devices and Printers] and open the
[Devices and Printers] folder.
ForWindows10:
Right-click on the [Start] icon and click [Control Panel]-[Hardware and Sound]-[Devices and Printers] and open the
[Devices and Printers] folder.
2
OpenthepropertiesoftheprintertowhichtheUSBash-via-PrinterDriverhasbeen
installed.
Right-click on the icon of the printer (USB), and select [Printer Properties] or [Properties] (for Windows Vista) in
the displayed menu.