Riso SF5 Series - Page 47

Chapter 2 Working with the Printer Driver
45
Chapter 2 Working with the Printer Driver
45
–FortheUSBash-via-PrinterDriver
Clicking [Details] opens the [USB print tag] dialog.
Useanoriginallename:
Select the check box to automatically use an original le name for identication on the application software on which
the document was created.
Jobname:
Enter ID name if you want to have any name different from one specied on the application software on which the
document was created.
Ownername:
Input the name of the administrator of the data to be stored or output to the USB Flash Drive. The default is the name
of the user logged into the computer.
Folder:
Select a folder (1-6) to use for storing or printing from the USB Flash Drive.
Drive(OnlyforUSBash-via-PrinterDriver):
Select the drive that the USB Flash Drive is connected to. The drive detected as the USB Flash Drive appears in the
drop-down list.
Displayamessagebeforedeletingdata:
Select the check box to display a conrmation message on the control panel of your RISO printer before deleting
stored data.
B
Youarenotallowedtousetheprohibitedcharactersasfollowsfor[Jobname]and[Ownername].
Prohibitedcharacters:\/:,;*?”<>l
B
With the Printer Driver for USB Flash Drive, when [USB print (Auto process)] is selected for [Output] (
A
44), the data is
automatically deleted after printing is nished.
4
Color
After [Color information] ([Image] tab) is refreshed and the information on ink colors is obtained, ink colors are
automatically selected from the ink colors mounted on the printer and the selected ink color is indicated in blue.
If the information cannot be obtained, manually select the print colors mounted on the printer.