Riso SF5 Series - Page 46

44
Chapter 2 Working with the Printer Driver
44
Chapter 2 Working with the Printer Driver
3
Output
C
Not displayed in the SF5 Series.
¢
Thisitemappearswhen[StorageMemory]onthe[Environment]tabissetto“Installed”.
PrintOnly
Send the data to your RISO printer, and start printing in the [Auto-process].
Print&Storage
The print job is processed and the data is stored in the printer. You can reactivate the stored data on your RISO
printer at anytime you like.
StorageOnly
Send the data to your RISO printer to be stored. You can reactivate the stored data on your RISO printer at anytime
you like.
FortheUSBash-via-PrinterDriver
USBprint(Manual)
Data is output to the USB Flash Drive. You can specify a folder for storing the data in the USB Flash Drive. (
A
45)
USBprint(Autoprocess)
Data is sent to the USB Flash Drive. It is printed according to the [Auto-process] setting. After a master-making, the
data in the USB Flash Drive is automatically deleted.
(A folder for storing the data in the USB Flash Drive cannot be selected. Data is stored in the [Auto process] folder.)
[Details]
Set additional information necessary for storing data and output of USB Flash Drive. The information below will be
stored together with the document data. Such information can be used to identify the data.
–ForthePrinterDriver
Selecting [Print & Storage] or [Storage Only] for [Output] enables you to click [Details]. Click [Details] to open the
[Storage Tag] dialog box.