Riso SF5 Series - Sending And Printing Data

Chapter 2 Working with the Printer Driver
37
Chapter 2 Working with the Printer Driver
37
SendingandPrintingData
Follow the procedures given below to print out document data directly on your RISO printer.
If the corresponding RISO Printer Driver has not been installed in your computer yet, install it rst, referring to the section
“Installing the Printer Driver” (
A
7).
B
ThemaximumprintareaisdifferentdependingonthemodelofRISOprinter.Ifyouwanttoknowthemaximumprint
areaofyourdocument,consulttheuser’sguideofyourRISOprinter.
B
Forotherlimitations,alsoreadtheuser’sguideofyourRISOprinter.
1
TurnonyourRISOprinterandloadpaper.
Load the proper paper to be printed.
2
Specifytheprintjobinthe[Print]dialogbox.
Turn on your computer and start Windows.
Open the document le to be printed, select [Print] in the [File] menu to open the [Print] dialog box.
3
SelectaPrinterDriver.
Select a Printer Driver that supports your printer from the [Select Printer] list.
To print from a USB Flash Drive, select [Printer Name (USB)] and connect the USB Flash Drive to your computer.