Riso SF5 Series - Installing the Printer Driver

14
Chapter 1 Installing the Printer Driver
14
Chapter 1 Installing the Printer Driver
InstallingthePrinterDriver
This section describes how to install the RISO Printer Driver when the computer is connected to the RISO printer through
network.
(Regarding the procedure for manual installation, see
A
66.)
B
Youarerequiredtohavetheadministrator’sprivilegetoinstallthePrinterDriverprograminyourcomputer.
B
ThisPrinterDriverdoesnotsupportserverOSorprintersharing.
B
When connecting to a commercial print server etc. on the network, refer to the instruction manual provided by the
manufacturer.
1
Insertthe[RISOPrinterDriver]DVD-ROMintoyourcomputer’sDVD-ROMdrive.
The installer is started. If the installer does not start up, double-click on the [Setup(.exe)] le in the folder below.
Fora32-bitOS:
(DVD-ROM):[Windows 32-bit] folder
Fora64-bitOS:
(DVD-ROM):[Windows 64-bit] folder
B
If the [User Account Control] dialog appears, click [Yes] or [Allow] (for Windows Vista).
2
Selectyourlanguagefromthedrop-downlist,thenclick[OK].