Riso SF5 Series - Chapter 5 Appendix; Error Message On Pcs Display

84
Chapter 5 Appendix
84
Chapter 5 Appendix
ErrorMessageonPC’sDisplay
Take actions as given below if the following error messages appear in the PC’s display.
Message Description Action
The printer is not ready for
printing.
(The device is not ready.)
This message appears when your
RISO printer requires paper or it
is not connected to your computer
properly.
Replenish paper or check your RISO printer
and the printer cable for poor connection, and
then restart printing.
This message also appears
when the memory of your RISO
printer becomes full during data
transmission because the size of
the document data concerned is
too large.
Reduce the le size of the document data
concerned or increase the value of the
[Timeout] setting in your computer system,
and then restart printing.
Cannot print because an
error is found in the current
printer settings.
This message appears if the printer
settings (paper size, print orientation,
etc.) in the application software and
the Printer Driver do not match.
Change the printer settings in the application
software to make them identical with those in
the Printer Driver or vice versa.