Riso SF5 Series - Page 45

Chapter 2 Working with the Printer Driver
43
Chapter 2 Working with the Printer Driver
43
When using any other custom-size paper than the displayed one, select [Custom] and enter its width and length in the
boxes.
B
You can select custom-size paper from the drop-down list by registering it beforehand. (
A
34)
B
The range of paper sizes that can be entered in the [Custom] dialog box depends on your RISO printer. For details, see
the User’s Guide of your RISO printer.
B
You can select the unit of size from [mm] and [inch].
[Portrait][Landscape]
This option is used for matching the page direction with the feed direction.
Specify the page direction.
B
Besuretospecifythesamepagedirectionwhichwassetintheapplicationsoftwareusedwhencreatingthe
documentdata.
2
Papersize
Select the paper size for printing.
If you do not use scaling, select [Same as original].
If you select a paper size that is different from the original text, the image will be scaled to t the selected paper size.
B
Ifyouselect[Printpositionadjustment](
A
49),scalingwillnotbedone.