Riso SF5 Series - Page 36

34
Chapter 2 Working with the Printer Driver
34
Chapter 2 Working with the Printer Driver
3
Registertheoptionsifneeded.
¢
RegisteringtheIPaddress(Onlyinthecaseofnetworkconnection)
Make settings for acquiring the printer information (ink colors and optional devices).
IPAddressoftheprinter
Enter the IP address of your RISO printer which is connected.
AutoDetection
Checkboxselected : Detection of the color information of the print color mounted on the printer is made
every time you open the printer’s properties to reect the in formation on the [Color]
for the Printer Driver.
For printing process without opening the printer’s properties, detection of color
information is made prior to printing process, and the data is output with the print
color mounted on the printer by tem porarily reecting the printer drive settings.
Checkboxnotselected : Color information is updated only when you click [Refresh] of the [Image] tab.
¢
Registeringoptionaldevices
Select [Installed] when the optional devices are connected.
JobSeparator
Select [Installed] if your RISO printer is equipped with the Job Separator.
StorageMemory*(USBash-via-PrinterDriverisnotavailable)
Select [Installed] if your RISO printer is equipped with the Document Storage Card.
* Not displayed in the SF5 Series.
¢
RegisteringCustomPaperSizeasStandard
You can register custom paper sizes as standard in the [Custom paper entry] dialog box, which can be opened
by clicking [Custom paper entry] in the [Environment] tab of the [Properties] dialog box. The custom paper sizes
can be named and displayed in the [Original size] of the [Basic] tab.
1) Click[Custompaperentry]todisplaythe[Custompaperentry]dialogbox.