Riso SF5 Series - Page 37

Chapter 2 Working with the Printer Driver
35
Chapter 2 Working with the Printer Driver
35
2)Enterthewidth,lengthandnameandclick[Add].
The registered name appears in the dialog box.
B
The length of the name can be up to 30 characters.
B
You can change the unit of length from “mm” to “inch”.
Height (Length)
Width
Paper
Feed direction
3)Click[Close]inthe[Custompaperentry]dialogbox.
B
EvenifyouusethepaperthatareregisteredintheCustompaperentry,itmaynotpassthroughthe
machinedependingonsuchfactorsasthepaperquality,ambientconditionsandstorageconditions.
B
You can save the information of your customer paper size as a Custom paper entry information le (.udp extension)
by clicking [Export]. If you want to register the custom paper size from the Custom Paper Entry information le,
click [Import] to select the le.
B
When registering the paper using with horizontal direction, enter the size of long edge in [Width] and enter the size
of short edge in [Length].
B
Entry of the name and dimensions will help you when you select the paper size. The length of the name can be up
to 30 characters.
B
The registrable paper size varies with the printer you use. For details, see the user’s guide of your printer.
B
When deleting a custom paper size, select the corresponding name from the list and click [Clear].