18
Chapter 1 Installing the Printer Driver
18
Chapter 1 Installing the Printer Driver
6) Select [Custom] and click [Settings].
7) Select [LPR] for [Protocol], input “lp” as the [Queue Name] under [LPR settings], and place a checkmark
in the [LPR Byte Counting Enabled] checkbox.
B
After the LPR function is added, your computer requires restarting. Therefore, be sure to store the necessary data in
your computer before carrying out the operation. Follow the instruction manual of Windows or Help for details.
B
Theimagesmaynotbeprintedproperlyif[LPRByteCountingEnabled]isnotselected.
To Next Page
Loading...
