4 Transportation and handling
EN
20 Rittal Liquid Cooling Package
4 Transportation and handling
4.1 Transportation
The Liquid Cooling Package is delivered bagged on a
pallet.
4.2 Unpacking
Remove the unit's packaging materials.
Check the unit for any damage that occurred during
transport.
Place the unit in its intended location.
Caution!
Because of its height and small base, the
Liquid Cooling Package is subject to tip-
ping. Risk of toppling, especially after the
unit is removed from the pallet!
Caution!
Transport of the Liquid Cooling Package
without a pallet:
Use only suitable and technically sound
lifting gear and load-bearing devices with
sufficient load capacity.
Note:
After unpacking, the packaging materials
must be disposed of in an environmentally
friendly way. They are comprised of the fol-
lowing materials:
Wood, polyethylene film (PE film), strap,
edge protectors.
Note:
Damage and other faults, e.g. incomplete
delivery, should immediately be reported to
the shipping company and to Rittal GmbH &
Co. KG in writing.
To Next Page
Loading...
Need help?
General
