7. Working life
51
DeutschEnglishFrancaisEspanolItaliano
7.1 Transport and storage
Damage due to transport and storage is to be reported to the line manager and to
RK Rose+Krieger GmbH immediately.
The product is to be checked by qualified staff for visual and functional damage.
It is forbidden to start up damaged controllers.
The following environmental conditions are laid down for controller storage:
• contact with solvent-based paints must be avoided
• lowest/highest ambient temperature: -25 °C/+60°C
• Relative humidity in storage: falling below the dewpoint is not allowed
Divergent environmental factors must be approved by RK Rose+Krieger GmbH.
To Next Page
Loading...
