39
Section 4 - In Roof Frame Installation
Mount Angle Brackets
Mount angle brackets (1) in equal distance with each 4 screws 4x30 (23) to the support batten. With
more than 2 collectors, mount rst and last angle bracket. Now use a string to level the rest of the
brackets by stretching it from one to the other. Now place the lower wooden slat (2) with the cut edge
showing upward and screw to angle brackets with each 4 screws 4x30 (23). If the battons are narrow
please use 2 battons to mount the brackets.
B = 0,5 cm
B
2
2
1
23
1
23
To Next Page
Loading...