Robe ROBIN iForte - Page 54

DMX protocol
Mode/Channel
1
44 0
45 128
46 0
47 128
48
0
49 128
50 0
51 128
52 32
53 0
54 0
Mode/Channel
1
1
Pan
0 - 255 Pan movement by 540° (128=default) proportional
2
Pan Fine
0 - 255 Fine control of pan movement (0=default) proportional
3
Tilt
0 - 255 Tilt movement by 270° (128=default) proportional
4
Tilt fine
0 - 255 Fine control of tilt movement (0=default) proportional
5
Pan/Tilt speed , Pan/Tilt time
0 Standard mode (0=default) step
1 Max. Speed Mode step
Pan/Tilt speed mode
2 - 255 Speed from max. to min. proportional
Pan/Tilt time mode
2 - 255 Time from 0.2 sec. to 25.5 sec. proportional
6
Power/Special functions
Factory display menu setting: DMX Input-Wired ,Graphic display-
On, Pan/tilt Mode-Speed,Blackout while pan/tilt moving-Off,
Blackout while gobo wheels moving-Off,Blackout while colour
wheels moving-Off, Fans mode-Auto, High-power mode Off , Quiet
mode: Fans Off at blackout,
0 -9 Reserved (0=default)
To activate following functions, stop in DMX value for at least 3 s and
shutter must be closed at least 3 sec. (Channel „Shutter/ Strobe” 52 must
be at range: 0-31 DMX). Corresponding menu items are temporarily
overridden except DMX input .
10-14
DMX input: Wired DMX *
step
15-19
DMX input: Wireless DMX *
step
* function is active only 10 seconds after switching the fixture on
20-24
Graphic display: On
step
25-29
Graphic display: Off
step
30-31
Quiet mode: Fans On at blackout
step
32-33
Quiet mode: Fans Off at blackout
step
34-39
Reserved
Dimmer intensity - fine
DMX Value
Function
Type of
control
Framing shutter 3 movement
Framing shutter 3- swivelling
Framing shutter 4 movement
Framing shutter 4- swivelling
Shutter/ strobe
Dimmer intensity
Framing shutter 1- movement
Framing shutter 1- swivelling
Framing shutter 2- movement
Framing shutter 2- swivelling
Default DMX
Value
Function
Page 2