Robin EY45V - Checking Procedures

7-4 CHECKING PROCEDURES
MEASURING RESISTANCES
1) Primary Side
-
7-4-1 IGNITION COIL
-
2) Secondary Side
n Tester
7-4-2 LAMP COIL and CHARGE COIL
1) Charge Coil
Tester
Note: The following resistance
values are measured
at 20°C.
Between stop lead and core
i"GZZd
Between high tension cord
and core
Between GreedWhite cord and
GreedWhite cord
10.9 - 1.3a 1
\
GreedWhite
2) Lamp Coil (Optional) Tester
Between red cord and core
-1
- 31 -